Mailinglist archive
| Mailinglist: | PanoTools NG |
| Sender: | Ken Warner |
| Date/Time: | 15-Nov-2008 21:44:39 +0100 |
| Subject: | Re: Re: Awful time stitching square suspended ceiling tiles :-( |
Thread:
I understand. Didn't think about that case. The case
of more than one row. My experience has been with only
one row. Thanks for the reply.
John Houghton wrote:
> --- In #removed#, Ken Warner <kwarner000@...> wrote:
>
>>Why does Ctrl+Alt+Shift+G to add control points to just 2
>>images at a time make any difference?
>
>
> Ken, This helps when image 1 has an overlap with image 2 and with image
> 3, say, and image 2 overlaps 3 and 4. The unfettered control point
> generator generates points for all these overlaps and this may not be
> appropriate, given that one may prefer to have the points at roughly
> equal angles of yaw (because the entrance pupil may vary in position
> for light rays entering the lens at different angles to the optical
> axis). Restricting the generator to generating points between nearest
> neighbours solves the problem, i.e. 1-2, 2-3 etc.
>
> John
>
>
------------------------------------
--
<*> Wiki: http://wiki.panotools.org
<*> User Guidelines: http://wiki.panotools.org/User_Guidelines
<*> Nabble (Web) http://www.nabble.com/PanoToolsNG-f15658.html
<*> NG Member Map http://www.panomaps.com/ng
<*> Moderators/List Admins: #removed#
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/PanoToolsNG/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/PanoToolsNG/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:#removed#
mailto:#removed#
<*> To unsubscribe from this group, send an email to:
#removed#
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Next message:
Previous message: