i just timed myself using ptgui with a set of images that had a pair
with very few details for control points. no template or anything
like that used. just the method i outlined earlier (but forgot to add
that you re-optimize and continue to delete points above 2) with a
handful of manual cp's and 4 vertical cp's it took six minutes.
without the bad pair of images, i imagine it may take 4 minutes in ptgui
i don't think there is much of a reason to do things manually if
automatic works well
mmm
On 17 Nov 2008, at 09:17, Andrew wrote:
> I guess I would normally do things manually but this is my largest job
> yet so I was hoping things would be more on the automatic and accurate
> side when it came to the ptgui part of the project.
>
> The vertical/horizontal shift seriously cleared things up and then
> creating control points on just 2 images at a time fine tuned it.
>
> I never noticed this issue before as it's my first time with the
> ceiling tiles. Next time it won't be so much work ;-)
>
> > In a repetitive image, automatic control points can be
> > wrong, since similar (or identical) features
> > are repeated.
> >
> > I always use manual controls in such circumstances
> > (brick walls, brick weave paving, parquet floors etc)
> >
> > BugBear
> >
>
>
>
[Non-text portions of this message have been removed]
------------------------------------
--
<*> Wiki: http://wiki.panotools.org
<*> User Guidelines: http://wiki.panotools.org/User_Guidelines
<*> Nabble (Web) http://www.nabble.com/PanoToolsNG-f15658.html
<*> NG Member Map http://www.panomaps.com/ng
<*> Moderators/List Admins: #removed#
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/PanoToolsNG/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/PanoToolsNG/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:#removed#
mailto:#removed#
<*> To unsubscribe from this group, send an email to:
#removed#
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Next message:
Previous message: