PanoTools mailing list archive

Mailinglist:PanoTools NG
Sender:'Mark Fink' markdfink@...
Date/Time:2016-Apr-29 14:16:14
Subject:RE: Convert GPS to HShift and VShift

Thread:


PanoTools NG: RE: Convert GPS to HShift and VShift 'Mark Fink' markdfink@... 2016-Apr-29 14:16:14
That's the plan. I have already done a small batch with seven images and
will work backwards from there.

Mark

Mark Fink
www.NorthernLight.net
1-845-380-0068
Images That Transport You

-----Original Message-----
From: #removed# [mailto:#removed#] 
Sent: Thursday, April 28, 2016 9:54 AM
To: #removed#
Subject: Re: [PanoToolsNG] Convert GPS to HShift and VShift

'Mark Fink' #removed# [PanoToolsNG] wrote:
> My question is, can I use the embedded GPS coordinates in each image to
produce at least estimated values for the HShift and VShift parameters? That
would get all the images properly positioned in a grid, hopefully making the
control point generator more efficient and accurate.
> My initial guess is that I would need to start with a base image, treating
that like an anchor, then calculate HShift and VShift as a relative
departures from the anchor image. Am I correct in that line of thinking?

That should work - I would be inclined to make up a small grid of images "by
hand", and reverse engineer the mapping from GPS coord to HShift/VShift from
the result.

  BugBear



------------------------------------
Posted by: paul womack <#removed#>
------------------------------------

--
------------------------------------

Yahoo Groups Links






------------------------------------
Posted by: "Mark Fink" <#removed#>
------------------------------------

-- 
<*> Wiki: http://wiki.panotools.org
<*> User Guidelines: http://wiki.panotools.org/User_Guidelines
<*> Nabble (Web) http://panotoolsng.586017.n4.nabble.com/
<*> NG Member Map http://www.panomaps.com/ng
<*> Moderators/List Admins: #removed# 

------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/PanoToolsNG/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/PanoToolsNG/join
    (Yahoo! ID required)

<*> To change settings via email:
    #removed# 
    #removed#

<*> To unsubscribe from this group, send an email to:
    #removed#

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/


Next thread:

Previous thread:

back to search page