PanoTools NG:
RE: Re: Batch Assemble 6 Cube faces to Equirectangular images
Sacha Griffin 2008-Jan-15 00:24:12
Sorry, I was confused and went the other way around. Looks like its going to
be at least 15-20 minutes for cubes to pano at 7000x3500
Sacha Griffin
Southern Digital Solutions LLC - Atlanta, Georgia
www.southern-digital.com
www.seeit360.net
www.ezphotosafe.com
404-551-4275
404-731-7798
_____
From: #removed# [mailto:#removed#] On
Behalf Of Sacha Griffin
Sent: Monday, January 14, 2008 6:12 PM
To: #removed#
Subject: RE: [PanoToolsNG] Re: Batch Assemble 6 Cube faces to
Equirectangular images
LOL! I figured you meant like 5 or 10 minutes, when you said long. Not two
hours.
Id recommend, downloading the scripts again in case you added a bunch of
zeros perhaps in the wrong place.
It looks like dosup only takes output width as the argument.. What do you
put?
I put 2000 and got output in about 2 minutes.
Sacha Griffin
Southern Digital Solutions LLC - Atlanta, Georgia
www.southern-digital.com
www.seeit360.net
www.ezphotosafe.com
404-551-4275
404-731-7798
_____
From: PanoToolsNG@ <mailto:PanoToolsNG%40yahoogroups.com> yahoogroups.com
[mailto:PanoToolsNG@ <mailto:PanoToolsNG%40yahoogroups.com> yahoogroups.com]
On
Behalf Of Carlos Chegado
Sent: Monday, January 14, 2008 6:07 PM
To: PanoToolsNG@ <mailto:PanoToolsNG%40yahoogroups.com> yahoogroups.com
Subject: Re: [PanoToolsNG] Re: Batch Assemble 6 Cube faces to
Equirectangular images
Hi Eric,
There must be a problem but I haven't figured it out yet!
To convert the equirectangular to six cube faces takes less than a
minute using Pano2Cube DOSUP script.
To do the inverse using Cube2Pano DOSUP script takes more than an 2
hours!!! (at this point I hit the cancel button)
If I use Erik Krause PTGui template it takes about a minute to assemble
the 6 cube faces to equirectangular format.
Both use the same PTStitcher!!!
I downloaded the last Panorama Tools version from Jim Watters web site
and both apps use the same PTStitcher!
So, something must be wrong, I just don't know what it is!
At this point Cube2Pano DOSUP script is useless because of the hours
long wait for each conversion.
Will use Erik Krause PTGui template for now but would prefer just have
some drag&drop action!
Can someone else try to convert an equirect image to 6xcube using
Pano2Cube DOSUP script and back again to equirect using Cube2Pano DOSUP
script to see how long it takes?
I think Eric Gerds script shouldn't be taking like forever to do this
conversion! So probably is the problem is here on my PC!
Os melhores cumprimentos,
Best regards,
~~~~~~~~~~~~~~
Carlos Chegado
Olho de Peixe Lda
====================================
Fotografias 360º »» www.carloschegado.com <http://www.carlosch
<http://www.carlosch <http://www.carloschegado.com> egado.com> egado.com>
====================================
gerdsy escreveu:
>
> --- In PanoToolsNG@ <mailto:PanoToolsNG%40yahoogroups.com> yahoogroups.com
> <mailto:PanoToolsNG%40yahoogroups.com>, Carlos Chegado <carloschegado@...>
> wrote:
> >
> > Hi,
> >
> > I have a large set of panos that I did during my PanoCubePlus era that
> > are cut in 6 Cube faces (never assembled those because was no need for
> > that back then).
> > I want to batch assemble these to normal Equirectangular images.
> > So far I have tried Pano2VR, works but only in manual mode, no droplet
> > for this situation, also tried Eric Gerds DOSUP scripts but the
> > Cube2Pano is very slow, take ages to assemble each image (8292x4146pix).
> > Does anyone know of a faster way of doing this?
> > Something like Eric Gerds DOSUP will do but have to be much faster!!!
> >
> >
> >
>
> I believe the default interpolation setting for Cube2Pano is
> spline 64. You could reset the default to spline16 or poly3 if you
> want something much faster.
>
> If you look in the program, you will see 2 lines:
> SET interpolate=i4
> SET interp=spline64
>
> You could change it to:
> SET interpolate=i1
> SET interp=spline16
>
> That would speed it up.
>
>
>
>
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
--
<*> Wiki: http://wiki.panotools.org
<*> User Guidelines: http://wiki.panotools.org/User_Guidelines
<*> Nabble (Web) http://www.nabble.com/PanoToolsNG-f15658.html
<*> NG Member Map http://www.panomaps.com/ng
<*> Moderators/List Admins: #removed#
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/PanoToolsNG/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/PanoToolsNG/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:#removed#
mailto:#removed#
<*> To unsubscribe from this group, send an email to:
#removed#
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/