PanoTools:
Re: screws... HELP!!! USA and GB members, please!!!
Ian Wood 2004-Nov-12 12:05:22
For making a threaded hole or nut you need a tap.
For making a threaded bar or screw you need a die.
I don't know the German names.
Try Chronos:
<http://www.chronos.ltd.uk/acatalog/index.html?http%3A//
www.chronos.ltd.uk/acatalog/
Chronos_Catalogue_Carbon_Taps___Dies_3.html&CatalogBody>
If this doesn't take you there directly the home page is
<http://www.chronos.ltd.uk>, 'enter store' on the left side, scroll
down to 'Taps & Dies', then 'Carbon Taps & Dies'
If you have any trouble let me know, I need to get some myself, I can
get extras and can post them to you.
Ian
On 12 Nov 2004, at 10:48, Luca Vascon wrote:
>
>
>> What you want are known either as 1/4" Whitworth and 3/8" Whitworth or
>> 1/4" UNC and 3/8" UNC.
>
> Anyone who can buy a nice screw-maker (what is the correct name???)
> male and
> female and send me it?
> Or just tell me the name in english and german so I look through eBay?
> Better if from europe side, less hassle and problems, and es sendig
> expenses.
> :-))))))))))
> Merci Danke Obrigado Thanx Grazie!!!!
>
> Luca.
> -----------------------------------------
> Università Iuav di Venezia
> -----------------------------------------
>
> Dr. Luca Vascon
> tel . (+39) 041.2571262, e-mail #removed#
>
> Laboratorio multimedia Facoltà di Design e Arti, DADI
> Magazzino 7 ex Ligabue, Dorsoduro 1827 30123 Venezia
> ITALY
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
------------------------ Yahoo! Groups Sponsor --------------------~-->
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/.Cr1lB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/PanoTools/
<*> To unsubscribe from this group, send an email to:
#removed#
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/