PanoTools NG:
Re: Workflow Macro
David Sykes 2007-May-12 16:57:58
Jim Watters wrote:
> Can you post some pictures and further description of you set up.
OK.
I do not have a website so I have created a folder in the files section.
As both my working cameras are in the photo, I have had to use a
low-resolution fixed-lens camera for the images.
You can use the table for stereo panoramas with a single camera,
stereo panoramas with two cameras, ordinary cylindrical panoramas,
object movies, extreme-telephoto cylindrical panoramas, monopod
rotator, etc.
The stereo rig is self explanatory and is controlled by a
microcontroller run off 4.8V worth of batteries.
The monopod rotator rotates a film camera with 8mm Sigma around it's
entrance-pupil.
The only tools you need are a pillar drill, hacksaw and files and some
practice at bending aluminium.
As I mentioned, it costs about £80 to make.
David
--
<*> Wiki: http://wiki.panotools.org/
<*> Nabble (web) http://www.nabble.com/PanoToolsNG-f15658.html
<*> NG Member Map http://www.panomaps.com/ng/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/PanoToolsNG/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/PanoToolsNG/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:#removed#
mailto:#removed#
<*> To unsubscribe from this group, send an email to:
#removed#
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/