PanoTools NG:
Re: Re: Processor Speedtest
Bernhard Vogl 2007-Aug-03 19:04:08
Hans Nyberg wrote:
> --- In #removed#, Bernhard Vogl <bvogl@...> wrote:
>
>> Some further numbers to add:
>> Talking about workflow: I re-tested using the internal PTGui stitcher as
>> this is the one i mostly use with PTGui.
>> As you can see, there are other more important factors than hardware to
>> speed up rendering ;-)
>>
>> So, here are the updated timings for the previously mentioned machines:
>>
>> First System (HP microtower):
>> PTGui Pro 7 Batch Render: 2:24
>> PTGui Pro 7 GUI: 2:24
>> PTGui Pro 7 GUI (using PTGui warper, Lanczos interpolator): 2:53
>> PTGui Pro 7 GUI (using PTGui warper, Lanczos interpolator, fast
>> transform): 1:02
>>
>> Second System (Acer laptop):
>>
>> PTGui Pro 7 Batch Render: 2:16
>> PTGui Pro 7 GUI: 2:09
>> PTGui Pro 7 GUI (using PTGui warper, Lanczos interpolator): 3:22
>> PTGui Pro 7 GUI (using PTGui warper, Lanczos interpolator, fast
>> transform): 1:17
>>
>>
>
> These 2 machines are very similar to my XP run in Parallels which is 2.16mhz
> The MacOS has to use some of that.
>
> This is my speeds.
>
>> PTGui Pro 7 GUI : 2:20
>> PTGui Pro 7 GUI (using PTGui warper, Lanczos interpolator): 3.20
>> PTGui Pro 7 GUI (using PTGui warper, Lanczos interpolator, fast
>> transform): 2.05
>>
>
> are you sure about the last numbers using fast transform.
> It does not make sense that your is 1 min faster only in that option while the 2 others are
> the same.
> I updated my pano12.dll to the faster version but that does not make any differense at all.
>
> Hans
>
>
>
>
>
>
>
>
--
Bernhard Vogl
Vienna, Austria
http://dativ.at
http://austria-360.at
http://hdview.at
Tutorials: http://www.dffe.at
--
<*> Wiki: http://wiki.panotools.org/
<*> Nabble (web) http://www.nabble.com/PanoToolsNG-f15658.html
<*> NG Member Map http://www.panomaps.com/ng/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/PanoToolsNG/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/PanoToolsNG/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:#removed#
mailto:#removed#
<*> To unsubscribe from this group, send an email to:
#removed#
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/