PanoTools:
Re: Problems with PTGui
John Houghton 2005-Mar-25 09:53:57
--- In #removed#, "Roger D. Williams" <#removed#>
wrote:
> By the way, I note that if you create a control point on Image 1
and then
> a matching one on Image 2, you shouldn't then start the next pair
on the
> SECOND image, Image 2. You have to go back to Image 1, create a
control
> point, and only THEN move again to Image 2. If you don't, PTGui
creates
> control points all by itself.
Roger, This is not true. You can place the first point of a pair on
either image. Exactly what happens is dependent on the setting of
the Jump and Auto buttons. Only if the Auto button is set will PTGui
create points automatically. The pattern matching will get better as
you add more points, but you should always check the accuracy of auto
placed points and move them when necessary. It helps if you assign
the images approximage initial yaw values.
John
PanoTools Wiki: http://wiki.panotools.org
PanoTools Extended Topic Forum: http://forum.panotools.info
PanoTools PayPal Donation Account: support _AT_ panotools.info ( _AT_ = @)
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/PanoTools/
<*> To unsubscribe from this group, send an email to:
#removed#
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/