PanoTools NG:
Re: Re: Not enough memory (RAM) after reassembling with Pano2QTvr
Pat Swovelin 2007-Jan-24 03:12:31
Erik Krause wrote:
> On Tuesday, January 23, 2007 at 21:36, Rodrigo Alarcon-Cielock wrote:
>
>> The Zenith and Nadir needed touching so I used Pano2Qtvr to convert
>> from an equirectangle image to a cube, to be able to touch up the
>> Zenith and the Nadir; once the patching was done the resulting pano
>> was 7664 x 3832 and 225mb in size. Now I can't open it with CS2, I
>> get the following message, "CS2 could not open the image because
>> there is not enough memory (RAM)".
>
> This seems to be the old packbits bug in Photoshop. Convert the pano
> from packbits compression to LZW or no compression (f.e. with tiffcp
> or ImageMagick - IrfanView works too, but reduces 16bit images to
> 8bit per channel). Then CS2 should open it.
>
> However, it is far easier to extract and insert cubefaces with PTGui,
> especially since it is not necessary to extract all faces if you only
> need one or two. And it saves remapping steps if you instert only the
> changed faces int the previously stitched panorama.
How, exactly, are cube faces extracted and put back in with PTGui?
> best regards
Pat Swovelin
Cool Guy @ Large
--
<*> Wiki: http://wiki.panotools.org/
<*> Nabble (web) http://www.nabble.com/PanoToolsNG-f15658.html
<*> NG Member Map http://www.panomaps.com/ng/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/PanoToolsNG/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/PanoToolsNG/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:#removed#
mailto:#removed#
<*> To unsubscribe from this group, send an email to:
#removed#
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/