PanoTools NG:
Re: Re: Processor Speedtest
Pat Swovelin 2007-Aug-04 22:48:15
On 8/4/2007 6:34 AM, Hans Nyberg rambled on about ...:
> --- In #removed#, "erik leeman" <erik.leeman@...> wrote:
>> I did some more runs to see if the results were reliable.
>> Not very I'd say now. The spread is just to wide between runs with
>> identical settings : (
>
> Well I just discovered what seems to be a bug in either panotools or
> PTGui Windows.
> PTGui 7.2 Panotools from Joost and the fast pano12.dll from Jim Watters
>
> Try this.
> 1. Stitch using PTgui but warp with panotools. no fast transform
> 2. Just book the use fast transform and stitch again without
> restarting PTgui
> 3. unbook fast transform and stitch without restarting PTGui
> 4. Save the last settings and close. open again and stitch.
>
> You will see that the fast transform reduces time with around 30% but
> it does not change
> back to No fast transform before you save it and restart,
>
> On Mac the fast transform does not have any effect at all with
> panotools warping, only
> with PTgui
Was this with PTGui 7.2 or PTGui Pro 7.2 (there may be a difference)?
> Hans
Pat Swovelin
Cool Guy @ Large
--
<*> Wiki: http://wiki.panotools.org/
<*> Nabble (web) http://www.nabble.com/PanoToolsNG-f15658.html
<*> NG Member Map http://www.panomaps.com/ng/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/PanoToolsNG/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/PanoToolsNG/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:#removed#
mailto:#removed#
<*> To unsubscribe from this group, send an email to:
#removed#
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/